Test Benches
 AMR
 Data Logger
 MUN-1
 MUN-4
 Valve Keys
 FORX
 Thrust Buster
 Strainers
 Zinc Caps
 Valve Locks
 Test Spools
 Insert Stiffeners
 Drill Taps
 Flanges
 
 
 

MARS Meter Test Benches...

...setting the standard for excellence.

It's no secret that a comprehensive meter testing program is the key to recovering lost revenues from existing meters that no longer register accurately. And no successful program is complete without quality meter testing equipment designed to give you the most for your investment dollars. MARS offers a wide variety of Meter Test Bench configurations designed to meet your specific requirements, testing meter sizes from 1/2" - 2" on small meter benches and 3" - 6" on large meter benches are standard, testing capacity, existing space limitations, and your budget!

Small Meter Test Benches
Large Meter Test Benches

MARS Small Meter Test Benches

MARS Meter Test Benches give you:

  • Highest accuracy

  • Consistent Reliability

  • Ease of Operation

  • Long-range durability

  • Operational safety

 5/8" - 1" Meters

Small 5/8" through 1" meters are held in position by brass saddle fixtures and polyethylene gaskets. These fit into the carrier bars which glide on stainless steel guide rails. Draw bars are located at each meter position to maintain the correct spacing when installing meters on the bench. A ball screw linear actuator from a compression seal on the meter ends during testing.

1 1/2" - 2" Meters

Larger 1 1/2" through 2" oval-flanged meters are held in place between carrier bars with large "O" ring seals. Stainless guide pins align the meter bolt holes ate the seal face. Fixtures for threaded meters fit into the carrier bar, sealing the meter with polyurethane gaskets. Draw bars at each meter position maintain correct spacing when the meters are placed on the bench.

 

5/8" through 1"

Series 500 - Single row, 5-position
Series 1000 - Single row, 10-position
Series 1200 - Single row, 12-position
Series 2400 - Double row, 24-position

1 1/2" through 1"

Series 2000 - Single row , 2-position
Series 5000 - Single row, 5-position
Series 10000 - Double row, 10-position

 Combination benches for 5/8" through 2"

Series 3-500 - double row:

5-position: 5/8" through 1"
3-position: 1 1/2" and 2"

Series 5-1000 - double row:

10-position: 5/8" through 1"
5-position: 1 1/2" and 2"

All MARS Test Benches have Stainless Steel trays and tanks.

 

MARS Large Meter Test Benches

MARS MD-80 LARGE METER TEST BENCH

The MARS Company, MD-80, Large Meter Test Bench, is a unique product which is designed to provide the test platform necessary to test large water meters including turbines, compounds, fireline meters, and even backflow preventers.

Although most modern Water Utilities have a test bench for testing residential meters and commercial meters up through 2 inch, most do not have equipment designed for testing meters from 3 inch and above. A few Utilities have produced some home made units with good performance. However, the time wasted during the bolting and fitting of these meters into a test line has been prohibitive. MARS Company solved this problem with a test unit which doees not require nuts and bolts. The meter, any meter, is placed on the bench alone or with several other meters, depending on the bench length, and held in place by a hydraulic clamping mechanism. The sizes can be changed and meters installed using a set of adapter spools, which come with the bench.

On average, the time required to set up the bench with multiple meters for testing, is less than five minutes regardless of meter size. This allows the Utility to test even new meters for compliance with the AWWA Standards or with local specifications. MARS Company supplies these advanced test systems with stainless steel tanks and gravimetric systems, which are traceable and certified by the State in which the unit is installed. For those unfamiliar with the terminology, GRAVIMETRIC SYSTEMS, simply means we weigh the water for accuracy to 1/10th of 1 percent.

Further, MARS offers a fully computerized meter testing system with meter inventory database. We also integrate this system into the central computer network to allow access to test records and inventory status by customer service and other authorized parties. For those who need just the Meter Inventory Database, it is also available from MARS Company as a stand-alone product.

MARS Company provides complete "TURNKEY INSTALLATION" at your location.

SINCE MOST UTILITES PRODUCE 60% OF THEIR REVENUE WITH ONLY 20% OF THEIR METERS, LARGE METER TESTING IS THE BEST SOLUTION FOR REVENUE PROTECTION AND REVENUE MAINTENANCE.

MARS Large Meter Test Benches give you:

  • Highest accuracy

  • Consistent Reliability

  • Ease of Operation

  • Long-range durability

  • Operational safety

 


This is the test bench is currently in use at Las Vegas Valley Water District.

Back to Top

Copyright © 1997 Floyd S. Salser, Jr and Associates: D/B/A Mars Company. All rights reserved.
Revised: September 11, 1999.